Horizontal Squeezing Machine (LDPE - PP)

Horizontal Squeezing Machine: Maximum Dryness and Energy Efficiency in Film Plastics

In the recycling process of soft plastics such as LDPE film and PP sacks, traditional drying methods are often insufficient. The OGZ Machine Horizontal Squeezing Machine is a high-performance technology developed for the dewatering of washed film plastics through a mechanical squeezing method. This machine does not just remove water from the surface of the material; it applies mechanical pressure to force water out from between the fibers completely.

Enhanced Screw Technology and 4-8% Moisture Content

The Horizontal Squeezing Machine features a specially designed screw (screw-barrel) geometry. This enhanced screw design absorbs fluctuations in the material volume arriving from the washing line, consistently delivering a stable output. Depending on the type and thickness of the plastic, it achieves a moisture content between 4-8% at the outlet, allowing the material to be fed directly into the granulator. This low moisture level prevents energy loss during the granulation stage and maximizes production capacity.

Efficiency Advantage of Mechanical Squeezing

Compared to hot-air drying or standard centrifuge systems, mechanical squeezing is the most efficient dewatering method for film-type plastics:

• Energy Savings: Since it does not require thermal treatment, it minimizes electrical consumption.

• Low Operating Cost: Maintenance intervals are long, and it dries high-volume material at a low cost.

• Volume Reduction: It compresses the material, increasing its density and thereby providing logistical convenience in storage and subsequent production stages.

Heavy-Duty Construction and Dynamic Power

The mechanical squeezing process creates immense pressure and dynamic load on the machine. To overcome this challenging process, our machine is built with the following technical equipment:

• High-Torque Reducer: Thanks to the extruder-type, heavy-duty reducer system, it operates without interruption even under the most challenging and congested material loads.

• Strong Chassis: The rigid body structure, manufactured from heavy-duty steels, completely dampens the vibration and pressure generated during the squeezing process.

• Wear Resistance: The screw and barrel group, which are subjected to continuous friction and pressure, are manufactured from specially heat-treated steels for long-lasting use.

Why the OGZ Machine Horizontal Squeezing Machine?

Drying quality in film-group plastics is the fundamental element determining the quality of the final granule. The Horizontal Squeezing Machine not only removes water but also pre-compacts the material, adding speed to your operation. With its ease of use and durability, it is one of the most profitable investments for large-scale recycling lines.